Home-Care
"We shall require a substantially new manner of thinking if mankind is to survive."
- Albert Einstein
Enagic’s® Water Machine Recommendations for Home Care
Sanitizing
-
2.5 pH:
Homemade products can be used for sanitation & sterilization of surfaces, and are a safe, cost-effective, non-toxic alternative to commercial and home care products.
-
2.5 pH:
If you scrub your bathtub and shower once a week it will keep soap scum and stains at bay while stopping germs from breeding.
Also, periodically soak your shower head in Strong Acidic Water to prevent clogs and kill mold.
2.5 pH:
Ditch the bleach with 2.5PH Water! Use Acidic Water to kill germs and get rid of stubborn stains in your toilet bowl.
-
2.5pH
Perfect for washing your hands before, during, and after handling food.
You can keep a spray bottle of our acidic water cleanser close to your sink to keep your hands free from germs as you prepare and cook your meals.
-
11.5 pH:
Emulsification capabilities cuts grease and oils for effective cleaning in kitchens, ovens, and stoves.
Clothing
-
Take a look at the label of your favorite laundry detergent. The ingredients listed in most brands are not what you would want to put directly on your skin, yet we wash our clothes in this toxic soup of chemicals.
The chemicals used in fragrance for detergents have been known to irritate the skin, trigger asthma attacks, and a host of other complications.
The act of simply purchasing laundry detergent could be putting your entire family at risk!
-
8.5 pH:
Can be used as an all-natural, household ingredient to make your own laundry detergent
-
8.5 pH:
This water is a powerful stain remover, which is gentle on the environment.
Whether you need help with coffee stains, oil stains, soy sauce, grease, or tough dirt, Strong Alkaline Water is the solution and prevents toxic runoff in natural water resources
-
Utilizing 8.5pH in your laundry, your favorite clothes will last much longer and stay in good quality!
Products
-
With one investment you will have a lifetime with a greener home and business while supporting reversing climate change, decreasing waste, pollution, and saving money.
-
2.5 - 11.5 pH:
Our water ionizing technology can be used as a degreaser and mild cleaning agent to make soaps, laundry & bleaching products, dish detergents, body care, teeth care, hair care, and drain & oven cleaners.
By making your own recipes, you can add specific fragrances for your home or business.
-
We spend an average of 90% of our time indoors, where air pollution can be 2 to 5 times greater than outdoor air pollution. This is a direct result of various pollutants that occur from within the home itself.
Pollutants like volatile organic compounds include cleaning supplies, molds, and products we regularly use.
This machine will give you the ability to eliminate so many harmful products that are inadvertently polluting your air and home.
-
2.5 pH:
Adding 2.5 pH water to a few common household ingredients creates a natural window cleaner that works.
Commercial Use
-
Greening your business:
Increase the viability and value of your business for your clients by choosing this technology that will change the way your brand is positioned.
-
Experience the power of Kangen Water® and see the different results of the food created!
Use Kangen Water® to wash your produce & grains, cook menus, serve your guests, and notice the increase of positive reviews!
-
Our machines are great for beauty & hair salons, spas, coffee shops, restaurants, agricultural facilities, daycare centers, fitness and training gyms, wellness clinics, assisted living facilities, and hospitals.
-
This water technology has been used for decades in Japan in hospitals & agriculture for a multitude of uses.
You will experience cost savings from buying fewer cleaning, nutrients, sanitizing, and chemical products.
Our machines are perfect for most commercial uses.
“The doctor of the future will give no medicine, but will instruct his patients in the care of the human frame, in diet & water, and in the cause and prevention of disease.”
– Thomas Edison
Enagic® Water Recipes for Home Use
-
Ingredients:
• 1 cup soap nuts (You can find soap nuts online or in your local health food store)
• 4 cups 8.5 - 9.5 pH
• A few drops of essential oil (optional)Directions:
• Crush the soap nuts, then soak them in 8.5 - 9.5 pH water overnight.
• Blend the mixture the next morning.
• Let sit for a few hours, stirring occasionally.
• Strain the liquid with cheesecloth.
• Add your favorite essential oil (lavender is a wonderful addition)
-
Ingredients
16 oz Sunflower Oil
5.5 oz Potassium Chloride
16 oz distilled 8.5 pH Water (collected with a steam boiler)
40 oz 8.5 pH Water
Essential Oil (optional)
DIRECTIONS
Blend:
Pour the sunflower oil into a crock pot with the heat on high. In a separate bowl, mix the potassium chloride with the distilled 8.5 pH Water. This mixture will become lye. Add the lye to the crock pot. Mix together using a hand-held stick blender on low until you create a paste. Pour the regular 8.5 pH Water into the crock pot and combine using the stick blender.
Cook:
Check the crock pot every hour. If the paste is separating, mix it with the stick blender. If not, stir with a wooden spoon. The consistency will change from a paste to something resembling applesauce. If it ever looks sticky and hard like taffy, use a potato masher to break it up. Once the mixture resembles petroleum jelly, your liquid castile soap is almost done.
Test:
Now you must test the soap to see if it is done. Boil some 8.5 pH Water in a kettle and measure 2 oz into a clear measuring cup, along with 1 oz of the soap mixture. Stir it with a spoon until the soap dissolves in the water. If it is cloudy, the soap is ready. If the mixture appears milky, the soap has not cooked long enough and needs to go back to the crock pot.
Once the consistency of the mixture is a bit cloudy, you can add a few drops of essential oil for a light scent. 6-8 drops is usually enough.
Pour warm liquid castile soap into bottles and allow to cool before using.
-
Ingredients
1/2 tsp baking soda
2 tsp borax powder
1/2 tsp liquid soap
2 cups 11 pH water
10-12 drops of essential oil (optional)
Directions:
Put all ingredients into a spray bottle, tighten the lid, and shake to blend ingredients.
-
Ingredients
3 tbsp liquid Kangen castile soap
2 cups 11 pH water
2 tsp vegetable glycerine
2 tbsp white vinegar or lemon juice
10 drops essential oil (optional)
Directions:
Combine in a recycled dish soap bottle and shake to blend.
-
Ingredients
2 tbsp Liquid Castile Soap
1 cup 6.0 pH Beauty Water
1/4 cup fresh herbs
1 tsp almond or apricot kernel oil
2 drops of essential oilDirections:
1. Place herbs in a clean glass jar with a lid and pour 6.0 pH Beauty Water over herbs and let steep overnight.
2. Strain the liquid from the herbs.
3.Add the castile soap and almond or apricot oil, and mix thoroughly.
4.Add essential oil and mix again.
5.Pour into a recycled shampoo bottle.
6.You can also spritz the Beauty Water on your hair as a conditioner. It helps detangle and reveal natural shine!
-
1 tsp Acai Berry Oil or Sweet Almond Oil
1 egg yolk
1 cup Beauty Water
Directions:
Beat the egg yolk until frothy.
Add the oil and beat again.
Slowly add the yolk mixture to the Beauty Water.
Massage into the scalp and rinse well.
*This is a one-use conditioner and is not meant to be stored.
-
Have you ever investigated what is in your antibacterial products? You might be surprised at the chemicals necessary for making your life germ-free. Try our natural Strong Acidic Water recipe instead.
Ingredients
10 drops of essential oil (peppermint or tea tree)
2.5 pH Strong Acidic Water
Directions:
Combine ingredients in a small spray bottle. Spray on hands and rub together.
-
Ingredients
21.8 oz Olive Oil
5.3 oz Palm Oil
5.3 oz Coconut Oil
4.3 oz Lye
11.9 oz cold 6.0 pH Beauty Water
There are several things you need to know before making Beauty Water Soap. Lye is an irritating agent that can be dangerous to your eyes and throat. Handle carefully with rubber gloves and safety glasses, and keep far away from children. Also, utensils, safety glasses, gloves, kettle, etc. should all be reserved for soap-making. Do not use these items for any other purpose. Finally, measure all your ingredients by weight, not volume.
Directions:
Combination of 4 tsp fragrant oil + 1 tsp herb. Our favorite combinations are rosemary oil with thyme leaves, lemongrass oil with sage leaves, rosewood oil, and bergamot herb, or lavender oil with sage leaves.
Carefully pour the lye into cold 6.0 pH Beauty Water, stirring slowly to avoid splashes. This lye mixture will quickly start to heat up in a powerful chemical reaction. Set aside. Now melt the oils together and let them chill to 120 degrees. Cool the lye mixture in cold 7.0 pH Neutral Water in the sink until it chills to 120 degrees. When the oils and lye mixture is the same temperature, pour the lye mixture carefully into the oil mixture, stirring slowly. Continue stirring for 45 - 55 min, until it reaches a trace (when you can see swirls). Now add the fragrant oil and herb. Pour the mixture into decorative molds, being careful not to splash or make bubbles. Cover with plastic wrap.
After 24 to 48 hours, the soap can be turned out of the mold. Allow curing for 3 to 4 more weeks, making sure the air can circulate all around the soap (or you can turn and rotate the bars every 2 days).
These beautiful soaps make wonderful gift items. Just be sure to let everyone know how healthy the Beauty Water Soaps are for their skin!
Testimonials
Enagic’s® Water Machine & Home Uses
